When the upgrade is finished, the following messages appear: Firmware update is complete.Ensure that the server is in standby power mode.Copy the transitional ELOM remote flash file from the Tools and Drivers CD to your TFTP server.Server File Name Sun Fire X4150 remoteflashelomtoilomX4150-026450 Sun Fire X4450 remoteflashelomtoilomX4450-4503B17 3.
Sun Fire X4150 Upgrade Is FinishedNote - The CLI commands, syntax, and namespaces in this section might be different from the commands, syntax, and namespaces used for your server; see the Embedded Lights Out Manager Administration Guide for your server for the appropriate commands, syntax, and namespaces. Log in to the CLI, and navigate to the TftpUpdate directory. Use the set command to set the IP address of the TFTP server. For example: - set ServerIP xxx.xxx.xxx.xxx where xxx.xxx.xxx.xxx is the IP address of the TFTP server. Use the set command to set the file name of the ELOM remote flash file. For example, for the Sun Fire X4450: - set FilenameX4450-418-3B17 7. Use the set command to start the TFTP download: - set Updateaction 8. Example: - cd SPTftpUpdate - set ServerIP123.456.78.910 - set FileNameX4450-418-3B17 - set Updateaction getting image. Log in to the ILOM web GUI using an account that has administrator privileges. For information about how to login in to the ILOM web GUI, see the Integrated Lights Out Manager Administration Guide. From the main menu, click the Maintenance tab The Maintenance submenu tabs appear. Click the Firmware Upgrade tab. Click the Enter Upgrade Mode button. A dialog box appears asking you to confirm that you want to enter Upgrade mode. Click OK to enter Upgrade mode. The ILOM enters upgrade mode. Click Browse to locate and select the ILOM combined firmware image file. The ILOM combined firmware image file is located on the Tools and Drivers CD at: Server ILOM Image File Location Sun Fire X4150 remoteflashilom2.0x4150-2.0.2.6.r35128.pkg Sun Fire X4450 remoteflashilom2.0.0x4450-2.0.2.6.pkg 7. Click Upload. The file is uploaded and verified as the correct image update for you SP. This process takes about two minutes. When the Verify Firmware Image page appears, click OK. Select Preserve Configuration to keep your ILOM settings. If not, the settings are overwritten by the firmware defaults. Click Start Upgrade. Once the update progress reaches 100, the firmware update is complete, and the ILOM automatically restarts. When the process finishes, power on and boot the system. The BIOS version information is updated once the server is powered on. Copy the ILOM combined firmware image file from the Tools and Drivers CD to your TFTP server. The ILOM combined firmware image file is located on the Tools and Drivers CD at: Server ILOM Image File Sun Fire X4150 remoteflashilom2.0x4150-2.0.2.6.r35128.pkg Sun Fire X4450 remoteflashilom2.0.0x4450-2.0.2.6.pkg 3. Log in to the CLI using an account that has administrator privileges. The CLI prompt appears: - For CLI access options and login instructions, see the Integrated Lights Out Manager Administration Guide for your server. For example: - load -source tftp: 123.45.678.910 x4150-2.0.2.6.r35128.pkg The firmware upgrade process begins, and a file load confirmation prompt appears. A prompt appears asking if you want to preserve the configuration.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |